課程信息
4.7
48 個評分
8 個審閱
專項課程

第 4 門課程(共 4 門),位於

100% online

100% online

立即開始,按照自己的計劃學習。
可靈活調整截止日期

可靈活調整截止日期

根據您的日程表重置截止日期。
中級

中級

完成時間(小時)

完成時間大約為8 小時

建議:3 hours/week...
可選語言

英語(English)

字幕:英語(English)...
專項課程

第 4 門課程(共 4 門),位於

100% online

100% online

立即開始,按照自己的計劃學習。
可靈活調整截止日期

可靈活調整截止日期

根據您的日程表重置截止日期。
中級

中級

完成時間(小時)

完成時間大約為8 小時

建議:3 hours/week...
可選語言

英語(English)

字幕:英語(English)...

教學大綱 - 您將從這門課程中學到什麼

1
完成時間(小時)
完成時間為 2 小時

Root Cause Analysis

In this module, Dr. Bill Bailey will cover root cause analysis, which includes the 7-step model, counter measure, and "single-minute exchange of die" (SMED). This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous belt material. This refresher area does not serve as a "replacement" for taking the material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content....
Reading
12 個視頻(共 51 分鐘), 5 個閱讀材料, 2 個測驗
Video12 個視頻
Purpose of Lean5分鐘
Cause and Effect Diagrams1分鐘
5 Whys4分鐘
FMEA - pt15分鐘
FMEA - pt25分鐘
FMEA - pt36分鐘
Introduction1分鐘
7-Step Model4分鐘
More Tools for Root Cause4分鐘
Counter Measures4分鐘
Single-minute Exchange of Die (SMED)5分鐘
Reading5 個閱讀材料
Highly-Recommended Text10分鐘
Introduction - Recommended Reading10分鐘
7-Step Model - Recommended Reading10分鐘
Counter Measures - Recommended Reading10分鐘
SMED - Recommended Reading10分鐘
Quiz2 個練習
Root Cause Analysis Practice Quiz20分鐘
Root Cause Analysis Graded Quiz20分鐘
2
完成時間(小時)
完成時間為 2 小時

Lean Tools

In this module, Dr. Bill Bailey will cover a more advance use of lean tools, including a look at the lean philosophy, lean goals, and lean systems. You will also be exposed to three important case studies. This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous yellow belt material. This refresher area does not serve as a "replacement" for taking the yellow belt material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content. ...
Reading
17 個視頻(共 79 分鐘), 2 個測驗
Video17 個視頻
Poka Yoke3分鐘
Removing Waste5分鐘
Kaizan4分鐘
Kan Ban8分鐘
5S4分鐘
Process Mapping - vid16分鐘
Process Mapping - vid23分鐘
Value Stream Mapping4分鐘
Total Productive Maintenance, Visual Management, & SMED4分鐘
Introduction1分鐘
Lean Philosophy5分鐘
Lean Goals4分鐘
Lean Tools & Systems5分鐘
Case Study 14分鐘
Case Study 23分鐘
Case Study 36分鐘
Quiz2 個練習
Lean Tools Practice Quiz20分鐘
Lean Tools Graded Quiz20分鐘
3
完成時間(小時)
完成時間為 1 小時

Statistical Process Control (SPC) & Control Plan

In this module, Dr. David Cook will cover statistical process control (SPC) and control plan....
Reading
5 個視頻(共 23 分鐘), 2 個閱讀材料, 2 個測驗
Video5 個視頻
Statistical Process Control - Part 23分鐘
Statistical Process Control - Part 32分鐘
Statistical Process Control - Part 45分鐘
Control Plan6分鐘
Reading2 個閱讀材料
Statistical Process Control - Recommended Reading10分鐘
Control Plan Recommended Reading10分鐘
Quiz2 個練習
SPC and Control Plan Practice Quiz18分鐘
SPC and Control Plan Graded Quiz20分鐘
4
完成時間(小時)
完成時間為 1 小時

Lean Tools for Process Control

In this module, Dr. David Cook will cover lean tools for process control....
Reading
2 個視頻(共 7 分鐘), 1 個閱讀材料, 2 個測驗
Video2 個視頻
Lean Tools for Process Control - Part 23分鐘
Reading1 個閱讀材料
Lean Tools and Process Control - Recommended Reading10分鐘
Quiz2 個練習
Lean Tools for Process Control Practice Quiz20分鐘
Lean Tools for Process Control Graded Quiz20分鐘
4.7
8 個審閱Chevron Right

熱門審閱

創建者 ELApr 29th 2018

SImplified version of the Lean Six Sigma book yet contains a significant amount of information.

講師

Avatar

David Cook, PhD

Assistant Professor of Mechanical Engineering Technology
Department of Mechanical Engineering Technology
Avatar

Bill Bailey, PhD

Assistant Professor of Industrial Engineering
Department of Systems and Industrial Engineering

關於 University System of Georgia

The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System....

關於 Six Sigma Green Belt 專項課程

This specialization is for you if you are looking to learn more about the more advanced components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance. In this specialization, you will learn proven principles and tools specific to six sigma and lean. This is a sequential, linear designed specialization that covers a more advanced level of content (at the "green belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is the second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt. The proper sequence of this specialization is: Course #1 - Six Sigma and the Organization (Advanced) Course #2 - Six Sigma Advanced Define and Measure Phase Course #3 - Six Sigma Advanced Analyze Phase Course #4 - Six Sigma Advanced Improve and Control Phase At the end of Course #4 (Six Sigma Advanced Improve and Control Phase), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization. It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma, but should assist in better preparation for such professional accreditation testing....
Six Sigma Green Belt

常見問題

  • 注册以便获得证书后,您将有权访问所有视频、测验和编程作业(如果适用)。只有在您的班次开课之后,才可以提交和审阅同学互评作业。如果您选择在不购买的情况下浏览课程,可能无法访问某些作业。

  • 您注册课程后,将有权访问专项课程中的所有课程,并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中,您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容,可以免费旁听课程。

還有其他問題嗎?請訪問 學生幫助中心