How can we create nano-structures that are 10,000 times smaller than the diameter of a human hair? How can we “see” at the nano-scale? Through instruction and lab demonstrations, in this course you will obtain a rich understanding of the capabilities of nanotechnology tools, and how to use this equipment for nano-scale fabrication and characterization. The nanoscale is the next frontier of the Maker culture, where designs become reality. To become a Nanotechnology Maker pioneer, we will introduce you to the practical knowledge, skills, and tools that can turn your nanotechnology ideas into physical form and that enable you to image objects at the nano-scale.
提供方
杜克大学
北卡罗莱纳州立大学
北卡罗莱纳大学教堂山分校
Nanotechnology: A Maker’s Course
杜克大学課程信息
199,129 次近期查看
學生職業成果
45%
完成這些課程後已開始新的職業生涯
38%
通過此課程獲得實實在在的工作福利
13%
加薪或升職
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
可靈活調整截止日期
根據您的日程表重置截止日期。
完成時間大約為26 小時
英語（English）
字幕：英語（English）, 越南語
講師
學生職業成果
45%
完成這些課程後已開始新的職業生涯
38%
通過此課程獲得實實在在的工作福利
13%
加薪或升職
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
可靈活調整截止日期
根據您的日程表重置截止日期。
完成時間大約為26 小時
英語（English）
字幕：英語（English）, 越南語
提供方
杜克大学
Duke University has about 13,000 undergraduate and graduate students and a world-class faculty helping to expand the frontiers of knowledge. The university has a strong commitment to applying knowledge in service to society, both near its North Carolina campus and around the world.
北卡罗莱纳州立大学
NC State was founded with a purpose: to create economic, societal and intellectual prosperity for the people of North Carolina and the country. We began as a land-grant institution teaching the agricultural and mechanical arts. Today, we’re a pre-eminent research enterprise that excels in science, technology, engineering, math, design, the humanities and social sciences, textiles and veterinary medicine.
北卡罗莱纳大学教堂山分校
The University of North Carolina at Chapel Hill, the nation’s first public university, is known around the world for innovative teaching and research. Regularly ranked as the nation’s best value for academic quality, UNC has produced the most Rhodes Scholars for the past 25 years among U.S. public research universities.
教學大綱 - 您將從這門課程中學到什麼
完成時間為 3 小時
Introduction to Nanotechnology
Welcome to Nanotechnology! In this module, you will learn some of the basics of nanofabrication and nanocharacterization techniques as well as specific applications of nanotechnology in commercial products. You’ll be able to explain why a cleanroom and vacuum environment are necessary for creating nanotechnology products. Finally, you will be able to explain how we use light, x-rays, and electron beams to characterize objects at the nanoscale. For more detailed learning objectives for each video, please see the first reading.
完成時間為 3 小時
10 個視頻 （總計 55 分鐘）, 3 個閱讀材料, 3 個測驗
10 個視頻
Introduction to RTNN2分鐘
What is Nanotechnology?7分鐘
Introduction to Nano Measurement Tools5分鐘
Introduction to Nano Fabrication Tools11分鐘
Essential Technologies for Nano: Cleanroom6分鐘
Essential Technologies for Nano: Vacuum Systems4分鐘
Essential Technologies for Nano: Electromagnetic Spectrum4分鐘
Essential Technologies for Nano: Electron Beams6分鐘
Accessing RTNN Facilities21
3 個閱讀材料
Learning Objectives for Introduction10分鐘
Learning Objectives for Essential Technologies for Nano10分鐘
Research Triangle Nanotechnology Network10分鐘
3 個練習
Practice Quiz for Introduction30分鐘
Practice Quiz for Essential Technologies for Nano30分鐘
Introduction and Essential Technologies for Nano30分鐘
完成時間為 3 小時
Nano Measurement and Characterization Tools: Scanning Electron Microscopy and Energy-Dispersive X-ray Spectroscopy
After this module, you will be able to explain sample preparation and imaging techniques used in scanning electron microscopy. You will also be able to explain the benefits of environmental scanning electron microscopy. Furthermore, you will discover how energy-dispersive x-ray spectroscopy can be paired with scanning electron microscopy to gain elemental information about samples.
完成時間為 3 小時
8 個視頻 （總計 30 分鐘）, 3 個閱讀材料, 3 個測驗
8 個視頻
Scanning Electron Microscopy: Sample Preparation Demonstration3分鐘
Scanning Electron Microscopy: Measurement Demonstration5分鐘
Energy-Dispersive X-ray Spectroscopy: Basic Function4分鐘
Energy-dispersive X-ray Spectroscopy: Sample Preparation Demonstration2分鐘
Energy-Dispersive X-ray Spectroscopy: Measurement Demonstration4分鐘
Introduction to RTNN2分鐘
Accessing RTNN Facilities21
3 個閱讀材料
Learning Objectives for Scanning Electron Microscopy10分鐘
Learning objectives for Energy-dispersive X-ray Spectroscopy10分鐘
Research Triangle Nanotechnology Network10分鐘
3 個練習
Practice Quiz for Scanning Electron Microscopy30分鐘
Practice Quiz on Energy-dispersive X-ray Spectroscopy30分鐘
Nano Measurement and Characterization Tools: Scanning Electron Microscopy and Energy-Dispersive X-ray Spectroscopy30分鐘
完成時間為 3 小時
Nano Measurement and Characterization Tools: Transmission Electron Microscopy
In this module, we will look at transmission electron microscopy and cryo-transmission electron microscopy. You will learn to describe the basic function of the equipment as well as how samples are prepared and imaged using these techniques.
完成時間為 3 小時
7 個視頻 （總計 33 分鐘）, 3 個閱讀材料, 3 個測驗
7 個視頻
Transmission Electron Microscopy: Sample Preparation Demonstration5分鐘
Transmission Electron Microscopy: Measurement Demonstration4分鐘
Cryo-Transmission Electron Microscopy: Basic Function5分鐘
Cryo-Transmission Electron Microscopy: Sample Preparation Demonstration6分鐘
Introduction to RTNN2分鐘
Accessing RTNN Facilities21
3 個閱讀材料
Learning Objectives for Transmission Electron Microscopy10分鐘
Learning Objectives for Cryo-Transmission Electron Microscopy10分鐘
Research Triangle Nanotechnology Network10分鐘
3 個練習
Practice quiz on Transmission Electron Microscopy30分鐘
Practice Quiz on Cryo-Transmission Electron Microscopy30分鐘
Nano Measurement and Characterization Tools: Transmission Electron Microscopy30分鐘
完成時間為 4 小時
Nano Measurement and Characterization Tools: X-ray and Optical Characterization
In this module, we will see demonstrations of micro-computed tomography, X-ray photoelectron spectroscopy, and optical spectroscopy. You will learn the basic function of the equipment and how samples are prepared and measured.
完成時間為 4 小時
11 個視頻 （總計 51 分鐘）, 4 個閱讀材料, 4 個測驗
11 個視頻
Micro Computed Tomography: Sample Preparation Demonstration5分鐘
Micro Computed Tomography: Measurement Demonstration5分鐘
X-ray Photoelectron Spectroscopy: Basic Function9分鐘
X-ray Photoelectron Spectroscopy: Sample Preparation Demonstration2分鐘
X-ray Photoelectron Spectroscopy: Measurement Demonstration5分鐘
Optical Spectroscopy: Basic Function7分鐘
Optical Spectroscopy: Sample Preparation Demonstration3分鐘
Optical Spectroscopy: Measurement Demonstration3分鐘
Introduction to RTNN2分鐘
Accessing RTNN Facilities21
4 個閱讀材料
Learning Objectives for Micro Computed Tomography10分鐘
Learning Objectives for X-ray Photoelectron Spectroscopy10分鐘
Learning Objectives for Optical Spectroscopy10分鐘
Research Triangle Nanotechnology Network10分鐘
4 個練習
Practice Quiz on Micro Computed Tomography30分鐘
Practice Quiz on X-ray Photoelectron Spectroscopy30分鐘
Practice Quiz on Optical Spectroscopy30分鐘
Nano Measurement and Characterization Tools: X-ray and Optical Characterization30分鐘
審閱
來自NANOTECHNOLOGY: A MAKER’S COURSE的熱門評論
由 RM 提供2020年5月21日
Highly informative..Nan Jokerst , you are the best teacher .Amazing team work with proper theory as well as practical knowledge. I gained my interest in Nanotech. Thankyou for the wonderful sessions.
由 AS 提供2018年11月6日
An amazing course which gives both of the practical and theoretical parts of whatever equipment explained and gives the needed information for the usage without filling unnecessary deep concepts.
由 M 提供2020年5月27日
In my undergrad I have learned about fabrication in the VLSI course, now I have got the gest of cooking. thank you for such a course, hope I will get some further help from rtnn.org & RTNN team.
由 MS 提供2019年12月1日
This course was very helpful to understand the basic fabrication techniques for making micro and nanodevices. I can confidently use equipment in my laboratory after doing this course. Thank you
常見問題
我什么时候能够访问课程视频和作业？
讲座和作业的访问权限取决于您的注册类型。如果您以旁听模式参加课程，则可以免费查看大多数课程资料。要访问评分作业并获得证书，您需要在旁听期间或之后购买证书体验。如果看不到旁听选项：
- 课程可能不提供旁听选项。您可以尝试免费试用，也可以申请助学金。
- 课程可能会改为提供'完整课程，没有证书'。通过此选项，您可以查看所有课程材料、提交所要求的作业，以及获得最终成绩。这也意味着您将无法购买证书体验。
我购买证书后会得到什么？
您购买证书后，将有权访问所有课程材料，包括评分作业。完成课程后，您的电子课程证书将添加到您的成就页中，您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容，可以免费旁听课程。
Is financial aid available?
是的，Coursera 可以向无法承担学费的学生提供助学金。点击左侧‘注册’按钮下的‘助学金’链接即可申请助学金。您可以根据屏幕提示完成申请，申请获批后会收到通知。了解详情。
What background is necessary to be successful in this course?
Learners will need to have taken a course in high school (secondary school) physics or chemistry
Will I receive a transcript from Duke University for completing this course?
No. Completion of a Coursera course does not earn you academic credit from Duke; therefore, Duke is not able to provide you with a university transcript. However, your electronic Certificate will be added to your Accomplishments page - from there, you can print your Certificate or add it to your LinkedIn profile.
完成课程后，我会获得大学学分吗？
此课程不提供大学学分，但部分大学可能会选择接受课程证书作为学分。查看您的合作院校，了解详情。Coursera 上的在线学位和 Mastertrack™ 证书提供获得大学学分的机会。
還有其他問題嗎？請訪問 學生幫助中心。
