This course is an introduction to learning and applying the principles required to solve engineering mechanics problems. Concepts will be applied in this course from previous courses you have taken in basic math and physics. The course addresses the modeling and analysis of static equilibrium problems with an emphasis on real world engineering applications and problem solving.
工程力学导论
乔治亚理工学院課程信息
396,818 次近期查看
學生職業成果
33%
完成這些課程後已開始新的職業生涯
32%
通過此課程獲得實實在在的工作福利
20%
加薪或升職
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
可靈活調整截止日期
根據您的日程表重置截止日期。
完成時間大約為13 小時
英語（English）
字幕：英語（English）
學生職業成果
33%
完成這些課程後已開始新的職業生涯
32%
通過此課程獲得實實在在的工作福利
20%
加薪或升職
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
可靈活調整截止日期
根據您的日程表重置截止日期。
完成時間大約為13 小時
英語（English）
字幕：英語（English）
提供方
乔治亚理工学院
The Georgia Institute of Technology is one of the nation's top research universities, distinguished by its commitment to improving the human condition through advanced science and technology.
教學大綱 - 您將從這門課程中學到什麼
完成時間為 3 小時
Forces and Particle Equilibrium
In this section, students will learn the definition of a force and how to represent a force as a vector in two (2D) and three (3D) dimensions. Students will learn the concept of particle equilibrium and equilibrium of systems of particles. Concepts will be reinforced with example problems.
完成時間為 3 小時
7 個視頻 （總計 52 分鐘）, 14 個閱讀材料, 1 個測驗
7 個視頻
Module 2: Definition of a Force4分鐘
Module 3: Force Representation in 2D and Resultants8分鐘
Module 4: Force Representation in 3D8分鐘
Module 5: Particle Equilibrium4分鐘
Module 6: Systems of Particles Equilibrium11分鐘
Module 7: Solve a Particle Equilibrium Problem6分鐘
14 個閱讀材料
Syllabus10分鐘
PDF version of Solve a Particle Equilibrium Problem Powerpoint10分鐘
PDF version of Course Introduction Powerpoint10分鐘
PDF version of Definition of a Force Powerpoint10分鐘
Consent Form10分鐘
PDF version of Force Representation in 2D and Resultants Powepoints10分鐘
Module Materials: Force Representations in 2D and Resultants10分鐘
PDF version of Force Representation in 3D Powerpoint10分鐘
Module Materials: Force Representation in 3D10分鐘
Practice Problems10分鐘
Get More from Georgia Tech10分鐘
PDF version of Particle Equilibrium Powerpoint10分鐘
PDF version of Systems of Particles Equilibrium Powerpoint10分鐘
Solution to Quiz10分鐘
1 個練習
Forces and Particle Equilibrium6分鐘
完成時間為 2 小時
Define and Calculate Moments
In this section, students will learn the definition of a moment. Students will calculate the moment of a force about a point, line or axis, and moment due to a couple.
完成時間為 2 小時
5 個視頻 （總計 41 分鐘）, 10 個閱讀材料, 1 個測驗
5 個視頻
Module 9: Solve a 2D Moment Problem9分鐘
Module 10: Solve a 3D Moment Problem4分鐘
Module 11: Moment About a Line/Axis9分鐘
Module 12: Moment Due to a Couple9分鐘
10 個閱讀材料
PDF version of Definition of a Moment Powerpoint10分鐘
PDF version of Solve a 2D Moment Problem Powerpoint10分鐘
PDF version of Solve a 3D Moment Problem Powerpoint10分鐘
Module Materials: Solve a 3D Moment Problem10分鐘
PDF version of Moment About a Line/Axis Powerpoint10分鐘
PDF version of Moment Due to a Couple Powerpoint10分鐘
Module Materials: Moment Due to a Couple10分鐘
Practice Problems10分鐘
Earn a Georgia Tech Badge/Certificate/CEUs10分鐘
Solution to Quiz 210分鐘
1 個練習
Define and Calculate Moments6分鐘
完成時間為 2 小時
Equilibrium and Equivalence of Force Systems
In this section, students will learn the equilibrium equations in two (2D) and three (3D) dimensions. Students will solve equivalent system problems. System force results will be defined and calculated.
完成時間為 2 小時
6 個視頻 （總計 46 分鐘）, 8 個閱讀材料, 1 個測驗
6 個視頻
Module 14: Conditions for Equivalent Equations9分鐘
Module 15: Solve an Equivalent Systems Problem10分鐘
Module 16: Single Force Resultants-Coplanar System5分鐘
Module 17: Single Force Resultants-Parallel Force Systems7分鐘
Module 18: Distributed Force Systems9分鐘
8 個閱讀材料
PDF version of 2D and 3D Equilibrium Equations Powerpoint10分鐘
PDF version of Conditions for Equivalent Equations Powerpoint10分鐘
PDF version of Solve an Equivalent Systems Problem Powerpoint10分鐘
PDF version of Single Force Resultants-Coplanar System Powerpoint10分鐘
PDF version of Single Force Resultants-Parallel Force Systems Powerpoint10分鐘
PDF version of Distributed Force Systems Powerpoint10分鐘
Practice Problems10分鐘
Solution to Quiz 310分鐘
1 個練習
Equilibrium and Equivalence of Force Systems6分鐘
完成時間為 2 小時
Free Body Diagrams and Equilibrium Analysis Techniques
In this section, students will learn to analyze general equilibrium problems. Free Body Diagrams (FBD) will be defined. Concepts will be reinforced with example problems.
完成時間為 2 小時
6 個視頻 （總計 47 分鐘）, 9 個閱讀材料, 1 個測驗
6 個視頻
Module 20: Method of Composite Parts I10分鐘
Module 21: Method of Composite Parts II8分鐘
Module 22: Resultant Force on Surfaces5分鐘
Module 23: Free Body Diagrams I8分鐘
Module 24: Free Body Diagrams II8分鐘
9 個閱讀材料
PDF version of Centroids Powerpoint10分鐘
PDF version of Method of Composite Parts I Powerpoint10分鐘
PDF version of Method of Composite Parts II Powerpoint10分鐘
PDF version of Resultant Force on Surfaces Powerpoint10分鐘
PDF version of Free Body Diagrams I Powerpoint10分鐘
PDF version of Free Body Diagrams II Powerpoint10分鐘
Module Materials: Free Body Diagrams II10分鐘
Practice Problems10分鐘
Solution to Quiz 410分鐘
1 個練習
Free Body Diagrams and Equilibrium Analysis Techniques6分鐘
審閱
來自工程力学导论的熱門評論
由 DL 提供2020年6月30日
First I like to thanks, Dr. Wayne Whiteman for his effort to take the lectures properly. The organization about the course is fine. I learned Engineering mechanics easily with his teaching methods.
由 ZA 提供2018年11月7日
The interactive approach of Dr. Wanye Whiteman leads to clarify the concept of Engineering Mechanics. I am glad to enroll this course, I will enroll further courses in future. Thank you so much
由 SW 提供2019年4月16日
everyone should do this course because experimental solutions are also explained and we get a practical approach for each question\n\nvery well prepared course with simple and lucid language.
由 RZ 提供2019年12月9日
A good introductory course on the analysis of 2D and 3D statically determinant structures. Dr. Whiteman explains things in a very clear and straightforward manner. Love the corny jokes as well.
常見問題
我什么时候能够访问课程视频和作业？
Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:
- The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.
- The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.
我购买证书后会得到什么？
您购买证书后，将有权访问所有课程材料，包括评分作业。完成课程后，您的电子课程证书将添加到您的成就页中，您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容，可以免费旁听课程。
退款政策是如何规定的？
您可在付款后两周内，或者在课程第一个班次开课后（对于已启动的课程）两周内，获得全额退款，以其中较晚者为准。获得课程证书后，您便无法再退款；即使您在两周的退款期内完成了课程，也是如此。请阅读我们完整的退款政策。
有助学金吗？
是的，Coursera 可以向无法承担学费的学生提供助学金。点击左侧‘注册’按钮下的‘助学金’链接即可申请助学金。您可以根据屏幕提示完成申请，申请获批后会收到通知。了解详情。
還有其他問題嗎？請訪問 學生幫助中心。
