Chevron Left
返回到 FPGA Capstone: Building FPGA Projects

學生對 科罗拉多大学波德分校 提供的 FPGA Capstone: Building FPGA Projects 的評價和反饋

4.8
星
14 個評分
•
5 條評論

課程概述

This course will give you hands-on FPGA design experience that uses all the concepts and skills you have developed up to now. You will need to purchase a DE10-Lite development kit. You will setup and test the MAX10 DE10-Lite board using the FPGA design tool Quartus Prime and the System Builder. You will: Design and test a Binary Coded Decimal Adder. Design and test a PWM Circuit, with verification by simulation. Design and test an ADC circuit, using Quartus Prime built-in tools to verify your circuit design. Create hardware for the NIOS II soft processor, including many interfaces, using Qsys (Platform Designer). Instantiate this design into a top-level DE10-Lite HDL file. Compile your completed hardware using Quartus Prime. Enhance and test a working design, using most aspects of the Quartus Prime Design Flow and the NIOS II Software Build Tools (SBT) for Eclipse. Create software for the NIOS II soft processor, including many interfaces, using Qsys (Platform Designer) and the SBT. Compile your completed software using the SBT. Use Quartus Prime to program both the FPGA hardware configuration and software code in you DE10-Lite development kit. Record all your observations in a lab notebook pdf. Submit your project files and lab notebook for grading. This course consists of 4 modules, approximately 1 per week for 4 weeks. Each module will include an hour or less of video lectures, plus reading assignments, discussion prompts, and project assignment that involves creating hardware and/or software in the FPGA....

熱門審閱

DK

2021年5月28日

Requires knowledge of FPGA design flow (make sure to take 3 courses before this one), great practical tasks that complete the whole specialization.

OS

2021年1月27日

This specialization has a very good balance between deepness and breadth of transmitted knowledge. Thank you !

篩選依據：

1 - FPGA Capstone: Building FPGA Projects 的 5 個評論（共 5 個）

創建者 Christian L

•

2022年1月26日

In general a good course structure and content. It lacks support on question and exercises.

創建者 Dmitry K

•

2021年5月29日

Requires knowledge of FPGA design flow (make sure to take 3 courses before this one), great practical tasks that complete the whole specialization.

創建者 Ovidiu S

•

2021年1月28日

This specialization has a very good balance between deepness and breadth of transmitted knowledge. Thank you !

創建者 Carlos M

•

2021年4月14日

Excellent course.

創建者 Molin D

•

2020年12月31日

This is a good course.

For some reason, I am looking for a course based on Xilinx FPGA. this one is based on Altera/Intel FPGA

Coursera Footer

開拓職業生涯或促進職業發展

瀏覽熱門主題

熱門課程和文章

在線獲得學位或證書

Coursera

社區

更多

隨時隨地學習
通過 App Store 下載通過 Google Play 獲取
Placeholder