課程信息
112,771 次近期查看

100% 在線

立即開始,按照自己的計劃學習。

可靈活調整截止日期

根據您的日程表重置截止日期。

英語(English)

字幕:英語(English), 越南語

您將獲得的技能

ArduinoC ProgrammingDebugging

100% 在線

立即開始,按照自己的計劃學習。

可靈活調整截止日期

根據您的日程表重置截止日期。

英語(English)

字幕:英語(English), 越南語

教學大綱 - 您將從這門課程中學到什麼

1
完成時間為 4 小時

Arduino Environment

This module provides an introduction to the Arduino environment which is composed of three things: the Arduino board, the Arduino IDE, and the Arduino-compatible shields together with their libraries. We first investigate the board, discussing all of its main components, inputs, and outputs. We discuss how each component is used and we examine the board schematic to see how they are connected. We then discuss the Arduino Integrated Development Environment (IDE) which is used primarily to write, compile, and upload code. We survey the interface of the IDE and discuss how to install and use it. We also examine the use of shields to extend the functionality of an Arduino-based system. We discuss how shield libraries provide a useful abstraction to facilitate programming.

...
9 個視頻 (總計 51 分鐘), 4 個閱讀材料, 2 個測驗
9 個視頻
Lecture 1.1: Arduino Platform8分鐘
Lecture 1.2: Arduino Board7分鐘
Lecture 1.3: Direct Programming3分鐘
Lecture 2.1: Arduino Schematics4分鐘
Lecture 2.2: Arduino IDE7分鐘
Lecture 2.3: Compiling Code4分鐘
Lecture 3.1: Arduino Shields and Libraries6分鐘
Lecture 3.2: Arduino Basic Setup6分鐘
4 個閱讀材料
Pre-Course Survey10分鐘
Course Overview10分鐘
Module 1 Objectives10分鐘
Module 1 Reading10分鐘
1 個練習
Module 1 Quiz16分鐘
2
完成時間為 4 小時

C Programming

This module covers the basics of the C programming language which will be used to write code for the Arduino. The course first covers basic syntax, variables, and types. Most of the basic C operators are presented. Conditional statements (if, switch) and loops (while, for) are described. The concept of functions is presented together with how to define and call functions. Creation and use of global variables is explained.

...
9 個視頻 (總計 62 分鐘), 4 個閱讀材料, 2 個測驗
9 個視頻
Lecture 1.1: Setting Up Your Environment7分鐘
Lecture 1.2: Hello World6分鐘
Lecture 1.3: Variables4分鐘
Lecture 2.1: Basic C Operators6分鐘
Lecture 2.2: Conditionals7分鐘
Lecture 2.3: Loops8分鐘
Lecture 3.1: Functions10分鐘
Lecture 3.2: Global Variables7分鐘
4 個閱讀材料
Module 2 Objectives10分鐘
Module 2 Mandatory Reading10分鐘
Module 2, Recommended Reading10分鐘
Planning Ahead for Modules 3 and 410分鐘
1 個練習
Module 2 Quiz16分鐘
3
完成時間為 4 小時

Arduino Programs

This module describes the composition of an Arduino program, or sketch, and the process by which it is compiled and uploaded. The Arduino IDE is a user interface for the software tools which actually compile and upload the program. We outline the use of these tools in the build process. We describe the basic structure of a sketch, including the use of the setup() and loop() functions. The main interface of an Arduino is through its pins, so we describe how to access those pins from a sketch.

...
10 個視頻 (總計 58 分鐘), 3 個閱讀材料, 2 個測驗
10 個視頻
Lecture 1.1: Arduino Toolchain5分鐘
Lecture 1.2: Cross-Compilation4分鐘
Lecture 1.3: Arduino Sketches9分鐘
Lecture 2.1: Classes7分鐘
Lecture 2.2: Sketch Structure4分鐘
Lecture 2.3: Pins7分鐘
Lecture 3.1: Input and Output6分鐘
Lecture 3.2: Blink Example5分鐘
Video Demonstration: Arduino Blink Example4分鐘
3 個閱讀材料
Module 3 Objectives10分鐘
Module 3 Reading10分鐘
Information About the Arduino10分鐘
1 個練習
Module 3 Quiz16分鐘
4
完成時間為 4 小時

Module 4

This module is an introduction on debugging embedded software on an Arduino. We discuss the basic debugging requirements: controllability and observability. The debugging environment available for an Arduino UNO is limited, so we describe how to use the UART communication protocol to gain controllability and observability. We present the use of the Serial library to communicate with the Arduino through the serial monitor.

...
9 個視頻 (總計 72 分鐘), 4 個閱讀材料, 2 個測驗
9 個視頻
Lecture 1.1: Debugging12分鐘
Lecture 1.2: Debug Environments12分鐘
Lecture 1.3: Debug via Serial8分鐘
Lecture 2.1: UART Protocol7分鐘
Lecture 2.2: UART Synchronization7分鐘
Lecture 2.3: UART Parity and Stop6分鐘
Lecture 3.1: Serial on Arduino (Updated)11分鐘
Lecture 3.2: Reading from Serial4分鐘
4 個閱讀材料
Module 4 Objectives10分鐘
Module 4 Reading10分鐘
Information about the Arduino10分鐘
End-of-Course Survey10分鐘
1 個練習
Module 4 Quiz16分鐘
4.6
684 個審閱Chevron Right

24%

完成這些課程後已開始新的職業生涯

30%

通過此課程獲得實實在在的工作福利

18%

加薪或升職

來自Arduino 平台与 C 语言程序设计的熱門評論

創建者 MRAug 9th 2016

A very good course to teach you the basics of Arduino platform and IDE. It'll help you get started on how to code your programs and lets you build up on it. I'd definitely recommend for a beginner.

創建者 MKAug 7th 2017

very good course to have basic understanding of C programming software , Arduino software which is explained in a very simple language where i was finding difficult before attending this course

講師

Avatar

Ian Harris

Professor
Department of Computer Science

關於 加州大学尔湾分校

Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCI’s unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways....

關於 物联网(IOT)程序设计入门 專項課程

Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms. This Specialization covers embedded systems, the Raspberry Pi Platform, and the Arduino environment for building devices that can control the physical world. In the final Capstone Project, you’ll apply the skills you learned by designing, building, and testing a microcontroller-based embedded system, producing a unique final project suitable for showcasing to future employers. Please note that this specialization does not offer discussion forums....
物联网(IOT)程序设计入门

常見問題

  • 注册以便获得证书后,您将有权访问所有视频、测验和编程作业(如果适用)。只有在您的班次开课之后,才可以提交和审阅同学互评作业。如果您选择在不购买的情况下浏览课程,可能无法访问某些作业。

  • 您注册课程后,将有权访问专项课程中的所有课程,并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中,您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容,可以免费旁听课程。

還有其他問題嗎?請訪問 學生幫助中心