机器人如何实时确定他们的状态，并从带有噪声的传感器测量量获得周围环境的信息？在这个模块中，你将学习怎样让机器人把不确定性融入估计，并向动态和变化的世界进行学习。特殊专题包括用于定位和绘图的概率生成模型和贝叶斯滤波器。

Loading...

來自 University of Pennsylvania 的課程

机器人学：估计和学习

282 個評分

机器人如何实时确定他们的状态，并从带有噪声的传感器测量量获得周围环境的信息？在这个模块中，你将学习怎样让机器人把不确定性融入估计，并向动态和变化的世界进行学习。特殊专题包括用于定位和绘图的概率生成模型和贝叶斯滤波器。

從本節課中

Bayesian Estimation - Localization

We will learn about robotic localization. Specifically, our goal of this week is to understand a how range measurements, coupled with odometer readings, can place a robot on a map. Later in the week, we introduce 3D localization as well.

- Daniel LeeProfessor of Electrical and Systems Engineering

School of Engineering and Applied Science

This week we will learn about self-localization techniques including

the particle filter.

In this first lecture, we will consider models for

odometry as a first order approximation to the robot's location.

As in your car, where the odometer records how many miles you have traveled,

odometry provides a measurement of how far the robot has moved.

Odometry is just one method of finding the robot's location in the world.

If we look at a typical application of localization,

car navigation, we see several ways to find location.

Information sources include GPS,

global positioning system, cellular networks, and Wi-Fi access points.

Each of these sources,

however, have certain levels of noise that lead to various levels of accuracy.

Driverless cars, for instance,

will need better than 3.5 meters of accuracy that the GPS provides.

That error is the difference between occupying the sidewalk and the road.

The previous sources represent global knowledge of position, exact coordinates.

Odometry and other sources of information can augment the global

localization sources with local knowledge.

How have they changed coordinates?

These sources of information are more precise, giving centimeter accuracy.

However, integrating sources, like encoders and

gyroscopes, over time can lead to drift.

This is due to the accumulation of errors in time.

Errors from slippage of the wheels deceive the encoder for instance.

Other local sensors like laser scanners and color and

depth cameras can help to correct these errors.

We will see how this incorporation happens later in the week.

Odometry updates start with modeling the robot.

Different robots,

such as humanoids or aerial vehicles, will require different models.

In our case, we will model a skid steer four-wheeled robot.

The odometry measurements come from ticks from the encoder

that measure how much the wheels have rotated in a given timeframe.

These ticks can be mapped into translation and rotation of the body of the robot.

First, let's explore the rotation odometry calculation.

With a skid steer robot, the left and

right sets of wheels are controlled independently.

When turning, these two sides form the inner and

outer radii of circles that share the same center.

Coupled with the knowledge of how wide the robot vehicle is,

we can determine a change in angle based on these encoder ticks.

First, we want to translate motor ticks into meters traveled by the inner and

outer wheels along their respective arcs.

This conversion requires knowledge of the wheel sizes.

Here, these measurements in meters are denoted eo and ei.

The inner and outer arcs are known, but

they also share the same angle of rotation.

With knowledge of the width of the robot,

we can use the difference in arcments to calculate the shared angle data.

Next, we will consider the translation of the robot.

Conveniently, the translation requires knowledge of the rotation that we have

already calculated.

In measuring translation, we can form a triangle with the known angle of rotation.

We then can average the change in position for

both the inner and outer wheel sets to find the change in the x direction.

The change in the y direction requires a similar methodology.

For small movements, this is a good approximation for the translation.

Unfortunately, the encoder measurements can be noisy due to wheel slippage.

Angular estimates then propagate errors into the translation estimates.

One solution to this problem is to utilize the gyroscope

to find a more precise measurement of angular change.

For a small number of time steps, the gyroscope can be very accurate.

Thus, angular odometry is measured solely by the rate of change

observed by the gyro, integrated over time.

This measurement aids in translation calculations as well.

This simple odometry approach to localization

requires a frame of reference for where the robot began its trip.

Local measurements from the encoders and gyroscopes still provide noisy estimates.

So we want to include more measurements to correct errors.

The next sections will discuss using maps to aid in localization correction,

as well as ways to probabilistically define our localization state.