公司财务精要课程会让你深入理解有关公司，投资者以及他们在资本市场的相互影响的核心金融问题。本课程结束时，你应该能够读懂大部分金融出版物并可以使用基本的企业和财务专业金融词汇。(邹广隶 译)

Loading...

來自 IESE Business School 的課程

公司财务精要

854 個評分

公司财务精要课程会让你深入理解有关公司，投资者以及他们在资本市场的相互影响的核心金融问题。本课程结束时，你应该能够读懂大部分金融出版物并可以使用基本的企业和财务专业金融词汇。(邹广隶 译)

從本節課中

Project Evaluation

In this session we will discuss how companies routinely decide whether or not to invest in projects. We will discuss the two tools most widely used for this purpose, NPV and IRR, and apply them to the evaluation of an investment opportunity.

- Javier EstradaProfessor of Financial Management

Department of Financial Management

[MUSIC]

Okay, now let's park the NPV for a minute now.

We'll get back to the NPV when we work out an example a few minutes from now.

Let's go to the other rule or the other tool.

And the other tool, as we said, is the IRR, or internal rate of return.

The expression for the IRR is the one you're seeing in the screen, and,

and that expression from the, for the IRR, as you see, on the left hand side has

exactly what we had before on the right hand side on the N, of the NPV expression.

In other words, what you have on the left hand side of the IRR expression is

basically an NPV and what you had on the right hand side is zero.

So basically what we're doing here is we need to input the cash flows of

the project in exactly the same way as we've done them before.

That is, I need to known what my initial investment is going to be.

I need to make a forecast of what the cash flows that I expect for

this project, from this project are going to be.

And now, here comes the big difference.

Now we don't discount those cash flows at the discount rate,

at the cost of capital, whatever might be the discount rate.

Now we equate this to zero and

what we solve for are those IRRs that you're seeing on the screen.

Now as we said before, if you remember, when we calculated in session, three,

the return that we would get from a bond by buying it at the market price and

holding it until maturity, that was more or less a number we calculated.

We didn't actually give it the name internal rate of return when we

discussed bonds, but one thing, an interesting thing to relate here

that's something that we're doing now with something that we've done before is that

the yield to maturity of a bond is exactly the internal rate of return of the bond.

That is, given the price and given the expected cash flows of a bond,

there's a mean annual return that you're going to get by solving an expression that

is identical to the expression that you have in front of you for

the internal rate of return of evaluating a project.

So now we're solving for

those IRR's, and the same thing that we said before for bonds applies here.

That's not an easy thing to solve.

Certainly this is not something that you can do by hand.

You need a scientific calculator,

you need Excel, you need some tool to help you solve that equation.

It may get very complicated.

If you have only a couple of periods, then it may not be all that complicated, but

whenever you have three, four, five periods, not only it

gets complicated to actually solve for the IRR, but you may encounter problems,

some of which we're going to discuss a couple of minutes from now.

So, point number one that is the expression of the internal rate of return.

Mathematically it's more difficult to solve than an impressing value, but

that is what we have to deal with now.

So a few things to keep in mind about this expression for

the internal rate of return.

As we said before, and

this is important that you keep in mind, do not minimize this.

This is not easy to solve, so do not try to do this by hand.

You need some sort of software with this.

Excel would do but you need some sort of software to, to do this.

And this second thing why I want to emphasize that it's mathematically complex

is because, you know, we typically think of what is the IRR of the project, and

the key word there is the, that is what is the IRR of the project.

Well, it doesn't have to be the IRR.

There may be more than one, and

again, that is one thing that we actually will discuss in a minute.

Of course, it's going to be problematic if we get more than one but

it is possible with the equation that you have in front of you.

Nothing guarantees that that equation is going to have only one solution.

It may have more than one.

It may have no solution at all.

So we'll get back to these issues in just a second, but for, for

now keep in mind that this is more difficult to

solve mathematically speaking than simply calculating a net present value.

The rule is actually fairly simple,

because the intuition once again is fairly simple.

Once we solve the for, for that IRR, once we solve for

that internal rate of return, that is some sort of the mean annual return that you

can expect from this particular project.

Exactly as we discussed from bonds before.

Remember, for in the case of bonds we took some money out of

our pocket to buy the bond at the market price.

We held the bond until maturity and expected to receive those cash flows, and

then we backed out.

We calculated beginning from the market price and

the expected cash flows, our mean annual return.

Well, this is identical, absolutely identical to that.

So basically, when we're solving the expression, for the IRR,

what we're saying is we're comparing the initial investment that I

have to make in this project with the cash flows I expect to get out of this project,

and what we're basically calculating is the return that I get from this project.

Now this return, if those cash flows are annual cash flows,

is going to be expressed in annual terms.

So it'll be a mean annual return that you expect from investing in this project.

Now, whether or not you're going to go ahead with this project or

not, goes back to first principles that we mentioned before.

That is, if you're calculating here the return of this project, you don't want

to invest in anything that doesn't give you at least the cost of raising funds to

invest in the project, and that is exactly what we call the cost of capital before.

So the rule is very simple, if the IRR is higher than the discount rate and

for now we still thinking that,

that discount rate is the cost of capital then you invest in this project.

If the IRR is lower than the discount rate, you do not want to invest in

this project because this is basically like burning money up.

It's like borrowing money at 5% and then investing money at 3%.

Well, that's something you don't want to do.

Companies don't want to do that, either.

So if you borrow at 5%, you want to invest at something that gives you more than 5%.

That is exactly what this rule tells you.

All right, so at the end of the day, it's a very intuitive rule.

It tells you if the return of the project is higher than the cost of

raising funds to invest in the project, go for it.

Otherwise don't.

So the intuition is getting simple.

The devil again is, is in the details.

So in terms of competing projects is when it gets a little tricky.

And it gets a little tricky, because it would seem to make sense to think that

the higher the IRR, that is, the higher the mean annual return of the project,

the more you would want to invest in it.

And sometimes that is true, and sometimes that is not true.

And if you're confused as to why that may not be true,

we're going to see an example in a minute why that may be the case.

But for now, let me say that in principle it

seems to be the case that the higher the return on the project the better.

In other words, if we're comparing project A and project B, and the IRR of project

A is higher than the IRR of project B, then we should go for project A.

And in many cases, that is true, but there are cases in which that is not true, and

we'll get to a specific example about that a couple minutes from from now.

That's why for now let me just say that, the rule has some loopholes.

So again in principle it looks like it makes sense that the higher the return on

the project, the more I want to go for

it, but we're going to see a couple of counterexamples, to that.

If it ever happens, and, and it might happen actually more than once,

that you have a conflict between what the NPV rule recommends and

what the IRR rule recommends, you always want to fall back on the NPV rule.

And the reason you want to fall back on the NPV rule is,

is that mathematical reason that we actually mentioned in passing.

We didn't get into the details, but

that mathematical reason that we mentioned before.

When you're calculating it at present value, that is not a tricky calculation.

It may be a messy calculation.

It may be cumbersome calculation, but it's simply calculation of a present value,

there's no mathematical complexity involved there.

When you're trying to solve the expression for the IRR, you may run into trouble.

You may run into situations where you have no solutions,

where you have many solutions.

And therefore it gets a little bit tricky, and

again we're going to discuss a couple of examples very soon but

as far as what matters real, or right now is concerned do remember that.

If you calculate a project's NPD, if you calculate a project, a, a project's IRR,

and it happens to be the case, because it doesn't have to be the case,

but if it happens to be the case that the NPD tells you go for this project, and

the IRR tells you don't go for this project, or the other way around,

always fall back, always rely on the recommendation of the NPV.

So that's important that you keep in mind.

In any case of conflict, you want to fall back, you want to follow the NPV rule.

Why are we saying all this?

Let me start from the end of what I want to cover in the next few minutes.

I don't want to tell you that you shouldn't use the IRR.

I don't want to tell you that the IRR is very problematic and

very cumbersome and therefore you should actually forget about it.

What I want to tell you is you should be careful when you use the IRR.

And in particularly, I want to tell you that you should know the structure of

the cash flows that you're dealing with.

And this will be more clear in a minute.

But let me start with an example that actually illustrates why you have to

be careful with the IRR.

Let's take a look at at these numbers.

Very simple project that you see.

Only three cash flow.

We have to put down 100 million today.

We expect to get 260 million a year from now.

And 165 million a year, two years from now.

And we're dealing with a company whose discount rate is 12%.

So if we have those cash flows and

a discount rate of 12%, well, we can do two things.

We can calculate the net present value, but because we're talking about

shortcomings, or problems with the IRR let, let's focus on the IRR.

And, here's a picture for you to take a look at.

Remember the definition of the IRR is the solution of that expression,

the IRR is the solution that gives you an NPV equal to zero.

That basically means that if I'm plotting different discount rates on the horizontal

axis, as the picture shows you, and I look at the NPV on the vertical axis,

for each discount rate I can calculate what the NPV would be.

And for some of those discount rates the NPV will be equal to zero.

Well in those cases, that's exactly the NPV that tells me that that is the IRR,

because remember that by definition, the IRR is the rate,

the discount rate that makes the net present value equal to zero.

Now you can see what the problem is with the picture.

That there's two times in which the line, the blue line crosses the horizontal axis.

And that means that there are two solutions for that equation.

And that means that there's two instances in which the net present value is

equal to zero.

Not just one, but two.

Now let me put down,

if in case you can't see the picture very clearly, what those IRR are, are.

One is an IRR of 10%, which is the one on the left, and

the other is an IRR of 50%, which is the one on the right.

And here comes the problem.

We're dealing with a company whose discount rate is 12%.

So what do we do?

We do not invest in this project, because the IRR is 10% and

therefore lower than 12%, or we do invest in this project

because the IRR is 50% and the discount rate is 12%.

That's the problem, and we cannot tell one or the other.

We cannot tell that one IRR is better, more accurate, or superior to the other.

There's no mathematical or intuitive way of doing that.

So here you see what the problem is.

We may be facing a situation in which the expression that we

need to solve doesn't have one solution but more than one.

In our extremely simple case, that solution is actually there's two

solutions, and they happen to be one below and one above our discount rate.

So what do we do in situations like that?

Exactly what we said before.

We need to fall back on the NPV.

And if you calculate the NPV of those cash flows and

you discount them at the rate of 12%, then you're going to get an NPV of 0.6 million,

or, or $600,000, and that number is positive, and

that tells you that you should ho, go ahead with this project.

So problem number one of the internal rate of return, we can have more than one.

In this very, very simple case, we actually have two, but

you can actually have many more,

depending on how complex, how long is the expression for the, for the NPV.

Just as an aside, and you know,

this, this doesn't really go to the heart of what we're discussing here, but

if you're wondering, what makes you know, what is the problem here?

Why do we have two solutions?

Well, you know, if you have a clean case, in which you

have a whole bunch of negative signs and then a whole bunch of positive signs.

In other words, you have changes in the signs of

the cash flows only once from negative to positive and from positive to negative,

then that guarantees that you're going to have only one IRR.

But of course you know, suppose that you're putting down some money to

start a project, you start receiving money out of the project.

But eventually three, four, five years down the road you need

to actually put down some money to add fresh capital to the project,

to maybe invest in buildings that have depreciated or

the machine that has depreciated and now you have another negative cash flow.

Once that additional negative cash flow appears then you

go from negative to positive to negative, and then it presumably to positive again.

Now once you start having those changes in the signs of the cash flows,

then you know, all bets are off.

Then you can have a number of different discount rates or

different solutions to the expression that, that we actually set up.

In fact the mathematical rule says that you can have

up to as many solutions as changes in the sign we have in the equation.

Again, this is just a passing comment if you're curious about it, or

if you're mathematically inclined, but what is important is that

nothing guarantees that you know, it's anti without knowing the cash flows of

the project that we're going to have only one IRR.

All right, if that were bad enough,

here comes sort of the opposite side of the coin.

The opposite, the one side of the coin is look, there's a problem with the IRR, and

depending on the structure of the cash flows we can have more then one solution.

And then it gets problematic to decide whether we should go

ahead with the project or not.

As we said before, if that is the case, go for the NPV rule.

[MUSIC]