[MUSIC] Greetings to all. In this class, we will draw the only type of door that our model will have. All the details such as doorknob and colors will be added later. As the windows, we will use the rectangle tool and line tool. Let's get started. Now we are going to draw a door called D4. First we open a new file, switch to top view and select line tool. We start drawing a vertical line of 6 centimeters length from the origin. Then we draw to the right of three centimeters length line, down one centimeter, right one centimeter, down five centimeters, right one centimeter, down five centimeters, left one centimeter, down one centimeter, then we draw to the left until we are over the green axis. And then finally, we'll draw up to close this polygram. Next, we change our view to iso view, then we use the line tool. We draw the path that will become the door frame. To do this, we draw a vertical line with 210 centimeters length and then a horizontal line with 90 centimeters length. Finally, we draw another vertical line but this time going downwards. Now we use the frame pass ready, we can use shift key to select these three lines, then we use the follow me tool to create a frame. With our door frame ready, we can delete unnecessarily lines to improve this door frame. After this, we switch to back view. With rectangle tool, we draw up 82x4 square centimeters rectangle. Then we use Push/Pull tool to pull the rectangle to the height that match the door frame, which is true because doors should have the bottom gap of 2 centimeters. We use again the Push/Pull tool to push the button of the door 2 cm. Now we just select our door and triple-click on it and make a group. Here we have completed our door. In today's class, we have learned a very standard way to create a fairly detailed door. Remember that this is on the best practice to do these type of elements. We will add more detail in the next videos. Let's stop for now. Goodbye. [MUSIC]