This course will cover the Measure phase and portions of the Analyze phase of the Six Sigma DMAIC (Define, Measure, Analyze, Improve, and Control) process. You will learn about lean tools for process analysis, failure mode and effects analysis (FMEA), measurement system analysis (MSA) and gauge repeatability and reproducibility (GR&R), and you will be introduced to basic statistics. This course will outline useful measure and analysis phase tools and will give you an overview of statistics as they are related to the Six Sigma process.
提供方
Six Sigma Yellow Belt 專項課程乔治亚大学系统課程信息
93,910 次近期查看
學生職業成果
33%
完成這些課程後已開始新的職業生涯
36%
通過此課程獲得實實在在的工作福利
11%
加薪或升職
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
第 3 門課程（共 4 門）
可靈活調整截止日期
根據您的日程表重置截止日期。
初級
完成時間大約為7 小時
英語（English）
字幕：英語（English）
您將獲得的技能
StatisticsBinomial DistributionData AnalysisCausality
學生職業成果
33%
完成這些課程後已開始新的職業生涯
36%
通過此課程獲得實實在在的工作福利
11%
加薪或升職
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
第 3 門課程（共 4 門）
可靈活調整截止日期
根據您的日程表重置截止日期。
初級
完成時間大約為7 小時
英語（English）
字幕：英語（English）
提供方
乔治亚大学系统
The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System.
教學大綱 - 您將從這門課程中學到什麼
完成時間為 1 小時
Measurement System Analysis
Welcome to Six Sigma Tools for Analyze! This is the third course in the Six Sigma Yellow Belt Specialization. Your team of instructors, Dr. Bill Bailey, Dr. David Cook, Dr. Christine Scherrer, and Dr. Gregory Wiles, currently work in the College of Engineering and Engineering Technology at Kennesaw State University. This module will introduce you to Measurement System Analysis (MSA) which is a key component of the Measure phase of the DMAIC process. You will also learn about Gauge Repeatability & Reproducibility (GR&R) and why it is used in the measurement phase.
完成時間為 1 小時
2 個視頻 （總計 10 分鐘）, 3 個閱讀材料, 2 個測驗
3 個閱讀材料
Highly-Recommended Text1分鐘
Measurement System Analysis - Recommended Reading3分鐘
Gage Repeatability & Reproducibility - Recommended Reading10分鐘
2 個練習
Measurement System Analysis Practice20分鐘
Measurement System Analysis Practice Graded Quiz16分鐘
完成時間為 2 小時
Process Analysis Tools
This module will introduce you to the Analysis phase of the DMAIC process. Process analysis helps you to better understand current processes and how they can be improved. You will be introduced to many of the different process analysis tools that are commonly used by Six Sigma experts. Failure Mode and Effects Analysis (FMEA) will also be introduced to help you better understand how to identify process failures.
完成時間為 2 小時
6 個視頻 （總計 29 分鐘）, 4 個閱讀材料, 2 個測驗
4 個閱讀材料
Eliminating Waste and 5S - Recommended Reading10分鐘
FMEA Pt. 1 - Recommended Reading5分鐘
FMEA Pt. 2 - Recommended Reading10分鐘
FMEA Gift - Recommended Reading20分鐘
2 個練習
Process Analysis Tools Practice20分鐘
Process Analysis Tools8分鐘
完成時間為 1 小時
Root Cause Analysis
Root cause analysis is a common problem solving step. Determining the root cause of something is an important aspect of uncovering the causes of a problem. In this module you will review the different tools used in determining root cause including 5-whys, process mapping, force-field analysis, and matrix charts.
完成時間為 1 小時
5 個視頻 （總計 21 分鐘）, 4 個閱讀材料, 2 個測驗
4 個閱讀材料
5 Whys - Recommended Reading5分鐘
Process Mapping - Recommended Reading15分鐘
Force Field Analysis - Recommended Reading2分鐘
Matrix Charts - Recommended Reading5分鐘
2 個練習
Root Cause Analysis Practice20分鐘
Root Cause Analysis Graded Quiz10分鐘
完成時間為 2 小時
Data Analysis
In this module you will be diving into the statistical side of Six Sigma. You will begin with learning about the basic distribution types which include normal and binomial. You will then proceed to variation and will learn the difference between common and special cause variation.
完成時間為 2 小時
7 個視頻 （總計 23 分鐘）, 4 個閱讀材料, 2 個測驗
7 個視頻
Calculating Probabilities Using the Normal Distribution4分鐘
Calculating Probabilities in the Normal Distribution: Example Problems3分鐘
The Binomial Distribution2分鐘
Binomial Distribution Calculations3分鐘
Binomial Distribution Calculations: More Examples3分鐘
Common Versus Special Cause Variation2分鐘
4 個閱讀材料
Characteristics of Probability Distributions - Recommended Reading20分鐘
The Normal Distribution Table10分鐘
The Binomial Distribution - Recommended Reading10分鐘
Common Versus Special Cause Variation - Recommended Reading15分鐘
2 個練習
Data Analysis Practice Quiz40分鐘
Data Analysis Graded Quiz30分鐘
審閱
來自SIX SIGMA TOOLS FOR ANALYZE的熱門評論
由 SS 提供2020年6月4日
The course is excellent but would love if the videos are much more explanatory rather than just reading out the PPT slides. Would suggest to use the animation tools for explaining.
由 KC 提供2019年10月4日
Got to learn new more things. As a suggestion, project work or peer-graded assignments can be included for more practice and understanding of charts and distributions.
由 AP 提供2020年4月25日
Excellent Course with all relative information from DMAIC tool Briefly for analyze part this is course is fulll depth coverage of all modules Thank you very much.
由 ET 提供2018年10月15日
I enjoy the clear presentations of the lecturers. The lecture slides are extremely helpful. The lectures compliment very well the ideas mentioned in the textbook.
關於 Six Sigma Yellow Belt 專項課程
This specialization is for you if you are looking to learn more about Six Sigma or refresh your knowledge of the basic components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance.
In this specialization, you will learn proven principles and tools specific to six sigma and lean.
This is a sequential, linear designed specialization that covers the introductory level content (at the "yellow belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is a second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt.
The proper sequence of this specialization is:
Course #1 - Six Sigma Fundamentals
Course #2 - Six Sigma Tools for Define and Measure
Course #3 - Six Sigma Tools for Analyze
Course #4 - Six Sigma Tools for Improve and Control
At the end of Course #4 (Six Sigma Tools for Improve and Control), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization.
It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma. However, successful completion will assist in better preparation for such professional accreditation testing.
常見問題
我什么时候能够访问课程视频和作业？
Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:
- The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.
- The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.
我订阅此专项课程后会得到什么？
您注册课程后，将有权访问专项课程中的所有课程，并且会在完成课程后获得证书。您的电子课程证书将添加到您的成就页中，您可以通过该页打印您的课程证书或将其添加到您的领英档案中。如果您只想阅读和查看课程内容，可以免费旁听课程。
退款政策是如何规定的？
如果订阅，您可以获得 7 天免费试听，在此期间，您可以取消课程，无需支付任何罚金。在此之后，我们不会退款，但您可以随时取消订阅。请阅读我们完整的退款政策。
有助学金吗？
是的，Coursera 可以为无法承担费用的学生提供助学金。通过点击左侧“注册”按钮下的“助学金”链接可以申请助学金。您可以根据屏幕提示完成申请，申请获批后会收到通知。您需要针对专项课程中的每一门课程完成上述步骤，包括毕业项目。了解更多。
What do I need to successfully complete this course?
Our applied curriculum is built around the latest handbook The Certified Six Sigma Handbook (2nd edition) and students will develop /learn the fundamentals of Six Sigma. Registration includes online access to all course content, projects, and resources. This price does not include the companion text The Certified Six Sigma Handbook (2nd edition).
完成课程后，我会获得大学学分吗？
此课程不提供大学学分，但部分大学可能会选择接受课程证书作为学分。查看您的合作院校，了解详情。Coursera 上的在线学位和 Mastertrack™ 证书提供获得大学学分的机会。
還有其他問題嗎？請訪問 學生幫助中心。
