The foundation of engineering design is often coupled with validation. Simulation is a great tool that allows engineers to test, validate, and modify designs before they become a physical prototype. When used early in the process for simulation driven design and throughout the development process, simulation can help drive the design, make informed design decisions, speed up time to production, and most importantly, identify and eliminate costly design mistakes.
提供方
課程信息
12,740 次近期查看
可靈活調整截止日期
根據您的日程表重置截止日期。
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
第 3 門課程（共 4 門）
中級
完成時間大約為17 小時
英語（English）
字幕：英語（English）
您將學到的內容有
Describe the simulation workflow in Fusion 360.
Summarize the use cases for various types of simulation studies.
Demonstrate knowledge and skills in more advanced Fusion 360 CAD and CAE skills.
Explain and identify simulation results
您將獲得的技能
- Autodesk
- Simulation
- Fusion 360
- Engineering Design
- Mechanical Engineering
可靈活調整截止日期
根據您的日程表重置截止日期。
可分享的證書
完成後獲得證書
100% 在線
立即開始，按照自己的計劃學習。
第 3 門課程（共 4 門）
中級
完成時間大約為17 小時
英語（English）
字幕：英語（English）
提供方
Autodesk
Welcome to the new possible. Autodesk is a global leader in design and make technology. With expertise across architecture, engineering, construction, design, manufacturing, and entertainment, we help innovators everywhere solve today’s pressing challenges. Because we believe that if you can dream it, you can Autodesk it.
授課大綱 - 您將從這門課程中學到什麼
完成時間為 4 小時
Static Stress Simulation
In Week 1, we’ll explore the setup, solve, and understanding surrounding static stress simulations. Starting with the basics and moving to more advanced tools such as bolted connections we’ll walk through how to prepare and process a static simulation.
完成時間為 4 小時
15 個視頻 （總計 73 分鐘）, 6 個閱讀材料, 1 個測驗
完成時間為 3 小時
Using Shape Optimization to Drive a Design
In Week 2, we’ll cover shape optimization simulation study type to explore load paths in designs. This simulation study will help engineers identify critical load paths in a design to make more informed decisions on material removal.
完成時間為 3 小時
9 個視頻 （總計 49 分鐘）, 3 個閱讀材料
完成時間為 5 小時
Nonlinear Response, Buckling and Modal Frequencies
In Week 3, we’ll focus on some additional simulation study types in Fusion 360, namely nonlinear response, structural buckling and modal frequencies. These study types allow for greater insight into structural and mechanical problems associated with a wide variety of designs. We will focus on various aspects of our gear reduction assembly as well as explore other examples suited for these types of simulations.
完成時間為 5 小時
14 個視頻 （總計 80 分鐘）, 3 個閱讀材料
完成時間為 5 小時
Thermal and Thermal Stress
In Week 4, we’ll explore and compare the effects of thermal and thermal stresses on designs. Temperature and heat can be a major factor in the failure of a design so exploring a design’s performance can lead to better informed design decisions. As a bonus, we’ll also look at event simulation and how a design performs when subject to motion and how it responds to an impact.
完成時間為 5 小時
11 個視頻 （總計 58 分鐘）, 3 個閱讀材料, 2 個測驗
審閱
- 5 stars84.33%
- 4 stars13.79%
- 3 stars1.58%
- 2 stars0.28%
來自SIMULATION ANALYSIS FOR MECHANICAL ENGINEERS WITH AUTODESK FUSION 360的熱門評論
由 DK 提供2020年7月11日
The course was informational and really helped to learn a new software and analyze the problem is a different way to get the best results out.
由 MM 提供2020年8月7日
Excellent primer on simulation - hard to find this type of specialized instruction. A lot of material, but definitely more than a cursory examination of simulation.
由 RM 提供2020年5月26日
The course covers all domains like structural,thermal and dynamics.The best thing is that the complex geometry used in simulation is also shared. The way of explaining the method is vert good.
由 PR 提供2020年11月15日
A very informative course from Autodesk. I found it very helpful in learning the new tools of fusion 360.
關於 Autodesk CAD/CAM/CAE for Mechanical Engineering 專項課程
The demand placed on today’s engineers goes above and beyond the job description. Products have become complex and engineers are more frequently asked to leave specialized roles and to take on a wide variety of tasks that are beyond their traditional responsibilities. These tasks are centered on form, fit, and function. Engineers need to factor in broader concerns such as cost, procurement, sustainability, manufacturability, and serviceability. Their role has moved away from an individual responsibility to working as part of a collaborative engineering team, executing tradeoffs with both engineering and business stakeholders to meet project goals. These trends have forced today’s engineers to broaden their skillset to be successful.
常見問題
我什么时候能够访问课程视频和作业？
我订阅此专项课程后会得到什么？
有助学金吗？
Are there additional learning resources available from Autodesk?
How to I access Autodesk® Fusion 360™ as a student or educator?
How to I access a Fusion 360 as a professional?
Will I earn any type of achievement by completing this course?
What are the system requirements for Fusion 360?
How do I get installation support for Fusion 360?
How do I share my designs on the Autodesk Fusion gallery?
How do I become an Autodesk Certified User?
Do I have the option to access these learning materials for free?
還有其他問題嗎？請訪問 學生幫助中心。
