Chevron Left
返回到 Machine Design Part I

Machine Design Part I, 乔治亚理工学院

4.8
745 個評分
203 個審閱

課程信息

“Machine Design Part I” is the first course in an in-depth three course series of “Machine Design.” The “Machine Design” Coursera series covers fundamental mechanical design topics, such as static and fatigue failure theories, the analysis of shafts, fasteners, and gears, and the design of mechanical systems such as gearboxes. Throughout this series of courses we will examine a number of exciting design case studies, including the material selection of a total hip implant, the design and testing of the wing on the 777 aircraft, and the impact of dynamic loads on the design of an bolted pressure vessel. In this first course, you will learn robust analysis techniques to predict and validate design performance and life. We will start by reviewing critical material properties in design, such as stress, strength, and the coefficient of thermal expansion. We then transition into static failure theories such as von Mises theory, which can be utilized to prevent failure in static loading applications such as the beams in bridges. Finally, we will learn fatigue failure criteria for designs with dynamic loads, such as the input shaft in the transmission of a car....

熱門審閱

創建者 ZZ

Feb 17, 2017

The course was a concise and effective review of major concepts. The concepts were well explained and the lessons practical. I have a better understanding of fatigue failure as a result of this class.

創建者 SG

Jun 12, 2017

Thank you so much. I liked your teaching style.You gave me a clear understanding about each and every topic covered in this course.I enjoyed the learning.Hope we will be in touch for further courses.

篩選依據:

195 個審閱

創建者 Keshav Gupta

Apr 10, 2019

nice learning

創建者 Utkarsh Kumar Singh

Apr 09, 2019

good

創建者 Guru Teja

Apr 08, 2019

where are part 2 and 3??

創建者 Noah Akhil Gomes

Apr 07, 2019

It was an absolute joy to learn this course and the practical aspects were very helpful and informative.

創建者 Ahmad Ibrahim

Mar 27, 2019

Very nice introductory course in Machine design, the two case studies chosen is very informative.

創建者 Parag Shrikant Tippannawar

Mar 25, 2019

it was very informative and very useful

創建者 Madhur

Mar 25, 2019

It was wonderful course and really cleared most of the doubts which were there. The course was very much effectively presented and the assignments were of good level.

創建者 Aditya Kumar

Mar 22, 2019

Course material is well organized. Real case analysis is perfectly solved. A lot to learn. Overall very good course for Industry and Students both.

Thank you Prof. Kate W.

創建者 Vaibhav Sharma

Mar 21, 2019

Great course for beginners in machine design.

創建者

Mar 21, 2019

ITS VERY GOOD COURSE AND I GOT OUTSTANDING DEEP KNOWLEDGE OF DESIGN AND MATERIAL PROPERTY.