Chevron Left
返回到 Introduction to CAD, CAM, and Practical CNC Machining

學生對 Autodesk 提供的 Introduction to CAD, CAM, and Practical CNC Machining 的評價和反饋

4.8
744 個評分

課程概述

This course introduces you to the foundational knowledge in computer-aided design, manufacture, and the practical use of CNC machines. In this course we begin with the basics in Autodesk® Fusion 360™ CAD by learning how to properly sketch and model 3D parts. Before we program any toolpaths, we’ll explore CNC machining basics to ensure we have the ground level foundational knowledge needed to effectively define toolpaths. Finally, we explore the basics of setting up a CAM program and defining toolpaths to cut simple geometry. This is the same basic process that gets repeated for the design and manufacture of any part and is a critical step in learning and understanding the process. Want to take your learning to the next level? Complete the Autodesk CAD/CAM for Manufacturing Specialization, and you’ll unlock an additional Autodesk Credential as further recognition of your success! The Autodesk Credential comes with a digital badge and certificate, which you can add to your resume and share on social media platforms like LinkedIn, Facebook, and Twitter. Sharing your Autodesk Credential can signal to hiring managers that you’ve got the right skills for the job and you’re up on the latest industry trends like generative design. Enroll in the Specialization here: https://www.coursera.org/specializations/autodesk-cad-cam-manufacturing Looking for Autodesk Fusion 360 certification prep courses? Check out additional learning resources to help you uplevel your skills: https://www.autodesk.com/learning...

熱門審閱

PL

2020年2月24日

Extremely helpful introduction into Fusion 360. When you are done with this course you'll be able to create a design, prep for manufacturing and initial setup of your CNC (or whatever your using).

NG

2020年4月5日

Well, structured course. Super useful for someone who designs customized machines and wants to manufacture parts for the same. Learned a lot from the Manufacture workspace of Fusion 360.

篩選依據:

176 - Introduction to CAD, CAM, and Practical CNC Machining 的 200 個評論(共 213 個)

創建者 Girish s

2020年6月5日

Good

創建者 Omkar C J

2020年5月20日

Nice

創建者 nithin c

2020年5月7日

Good

創建者 FAIZULLA K S

2020年5月4日

Good

創建者 Tilek A

2020年4月24日

good

創建者 SURESHKUMAR A

2020年4月13日

Good

創建者 George s 1

2020年4月12日

good

創建者 ABDUL R A

2020年3月31日

GOOD

創建者 sanyasi n b

2022年3月2日

G

創建者 Vaibhav K

2021年9月5日

.

創建者 Sabhaya p s

2021年8月11日

G

創建者 Dave M

2020年12月16日

The content, presentation, exercises, and quizzes are good. The course challenge project was appropriate - not too hard but not too easy.

The Discussion Forums are nearly useless. The weekly questions posted by the instructors add nothing to the learning experience. The forums would be a great opportunity to share thoughts on things like optimum tool paths, etc. If the instructors / moderators were to initiate this with good questions and discussion then the students would follow and, as a result, get more value from the forums.

I would give Autodesk a 5/5 rating and Coursera a 3/5 rating

創建者 George S

2020年5月12日

The video quality could be better. The content of the videos is appropriate for beginners like me. It was fun to learn the content. The software seems comprehensive. The grading and feedback/ discussion forums are nice. I look forward to learning more about Fusion 360. There is much information online to help with the learning. Thank you very much for offering this information.

GS from AZ

創建者 Shrey A

2020年4月2日

The last course challenge assignment should specify which dimensions the drawing has to be made in. I constructed all those dimensions in mm only to realize i could've been wrong when i saw the drill scales. The layout of the scale needs to be more clear too. Apart from this the course is very helpful. The tutorials are well paced, friendly and mind engaging.

創建者 Swapnil R

2020年6月2日

The course was informative. I learned many new things from this course. Some areas of improvement i would like to address: The course was difficult to understand. Also the UI of Fusion 360 for CAD modelling is not user friendly when compared to solidworks or PTC creo. It can do a much better job in improving the UI but otherwise FUSION 360 is a great tool.

創建者 Kaif C

2020年9月17日

It's been a great experience in the journey of learning this course. After completing the course I can able to design and create a model on fusion 360. I have also get to know various types of milling cnc machines and how they operates.

創建者 K M P

2022年1月17日

The course consists of video lectures which helped me to learn every tool in the ribbon. the course helps me to gain the designing skill which would help me to complete my project.

創建者 Federico

2020年5月10日

Good course. It would have been interesting go deeper in other features of Fusion 360. Anyway, very helpful course and accurate course material.

創建者 Oliver M

2020年1月4日

I found it to be a good introduction into the cam features using fusion 360

創建者 Anand H L

2020年5月10日

A good course for introducing the digital side of manufacturing

創建者 Bradley P

2020年1月5日

Great instruction due to the specifics for beginners.

創建者 Fakhar R k A

2020年10月11日

very helpful courses for CAD CAM introduction

創建者 MR. S A S

2020年10月8日

Great course for starting in CAM in fusion360

創建者 Mukesh K M

2021年2月27日

All the material provided are satisfactory

創建者 Adil E

2020年6月7日

Good Course with many details