Chevron Left
返回到 Converter Control

學生對 科罗拉多大学波德分校 提供的 Converter Control 的評價和反饋

4.8
526 個評分
109 條評論

課程概述

This course can also be taken for academic credit as ECEA 5702, part of CU Boulder’s Master of Science in Electrical Engineering degree. This course teaches how to design a feedback system to control a switching converter. The equivalent circuit models derived in the previous courses are extended to model small-signal ac variations. These models are then solved, to find the important transfer functions of the converter and its regulator system. Finally, the feedback loop is modeled, analyzed, and designed to meet requirements such as output regulation, bandwidth and transient response, and rejection of disturbances. Upon completion of this course, you will be able to design and analyze the feedback systems of switching regulators. This course assumes prior completion of courses Introduction to Power Electronics and Converter Circuits....

熱門審閱

TG
2020年2月10日

I am really happy taking this course. Challenging but the course really well structured so it helps a lot! My learning curve taking this course is huge. Thank you Prof. Erickson and team!

PC
2016年6月25日

The analysis and materials of this course are very useful. A great section. If the MATLAB script for calculating the converter Poles and Zeros can be provided will be even better.

篩選依據:

76 - Converter Control 的 100 個評論(共 102 個)

創建者 Frencell M

2018年3月14日

good course!!!

創建者 Anant K V

2016年8月13日

Great course

創建者 SURYA V

2016年5月27日

Good one !!!

創建者 Julio E F

2017年4月26日

Nice Course

創建者 Rubem P

2017年10月31日

Fantastic!

創建者 Behnam M

2019年10月9日

Amazing!

創建者 Akanimo I

2018年8月21日

Great

創建者 Cédric L

2018年10月12日

V

創建者 Miguel B A

2016年10月2日

E

創建者 Vaishakh V

2016年3月16日

V

創建者 Saar B

2020年11月16日

good practical course which give a unique insight in Switch mode control system.

the professor POV shows that a simple graphical construction of the transfer function can be sufficient and reduce the complexity otherwise needed to gain the same insight using exact computation.

furthermore a step by step explanation of how to contract a practical PID compensator is given .

I wish that the course would also contain a compensator explanation referring to the isolated (Flyback forward) converter using more practical topology (the control loop is isolated also).

創建者 Mirdoddi K

2020年8月12日

The course was exceptional. I found this course assignments more interesting than the assignments corresponding to course 1 and 2. Overall a good way to understand the design aspects of Power Converters. Thanks to Dr.Erickson and his team.

I would also like to add that I have read Dr. Erickson's book- Fundamentals of Power Converters during my undergraduate studies, it was the most phenomenal book I have ever read to date.

創建者 Sayantan G

2020年11月19日

Along with the asymptotic bode plot it could have been nice if bode plot thru simulation could have been introduced with the help of Matlab/python (preferably python, as its open source tool)

創建者 Maximilian Z

2017年5月4日

Unfortunately this course did not include the discussion feature as the previous two courses. This means if you get stuck there is no way of asking for help. Fortunately I managed.

創建者 Elyka A

2016年6月2日

Very good!

I think week 4 was very time consuming, in contrast with week 3, that was very light. Maybe these contents can be better balanced in the fuute.

創建者 Jacky H

2018年2月11日

I spent enormous amount of time figuring out some assignment questions. Hope the idea of these practices makes sense in the industry.

創建者 Andrew T

2017年3月19日

Great material however discussion forums is dead (despite hundreds of views), mentors are unresponsive to questions

創建者 Alexis_314159

2016年5月10日

Great content.

Need more exercises, and solution to homeworks (eventually).

創建者 Jehan A L

2017年6月30日

The explanation was clear and valuable I enjoyed very much

創建者 Philipp M

2017年9月17日

the learning material is very much and it is tough to get through the homeworks.

Expecially weeks 1 and 2 are mixed which makes it difficult to solve the first homework. As soon as you watch the first lectures of week 2, you wonder why that wasn't tought in the lectures of week 1.

Nevertheless, I still like the course and keep getting progress although I nearly have no preknowledge about the topic. I use the course to get some basic knowledge about this topic

創建者 rajat j

2016年4月3日

PWM Switch modelling and use of that to simplify converter modelling not covered in detail.

More theoretical. Intuition on the models that we derive is not there.

創建者 Mohamed E M

2020年5月15日

i dont feel that i can use what i ve learned in this course to design a modern SMPS, it feels outdated but nonetheless i learned some basics of control theroy

創建者 Manish K S

2020年7月13日

Assignments should be more formula based rather than giving exact numerical values with 0.1% accuracy. The 0.1% accuracy is very disturbing .

創建者 Akira Y

2016年4月12日

Contents are excellent.

The only disappointing is that It costs to submit assignments.

創建者 victor g

2017年7月21日

Great technological course on low power DC/DC converters.