Chevron Left
返回到 Arduino 平台与 C 语言程序设计

學生對 加州大学尔湾分校 提供的 Arduino 平台与 C 语言程序设计 的評價和反饋

4.7
6,759 個評分
1,528 條評論

課程概述

The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums. Upon completing this course, you will be able to: 1. Outline the composition of the Arduino development board 2. Describe what it means to program the board's firmware 3. Read board schematics 4. Install Arduino IDE 5. Describe what "shields" are and how they are used 6. Specify the role of libraries in the use of shields 7. Compile and run a program 8. Name C Variables and Types 9. Name common C operators 10. Use conditionals and loops 11. Explain functions, their definition and invocation 12. Explain the implications of global variables 13. Undertake the Arduino build process 14. Describe the role of the tools behind the IDE 15. Describe how to invoke functions in classes 16. Explain the structure of an Arduino sketch 17. Access the pins of the Arduino 18. Differentiate between digital and analog pin 19. Debug embedded software 20. Explain the importance of controllability and observability in the debugging process 21. Describe common debugging architectures for embedded systems 22. Explain how the UART Serial communication protocol works 23. Describe how the Arduino Serial library performs serial communication...

熱門審閱

MR

2016年8月8日

A very good course to teach you the basics of Arduino platform and IDE. It'll help you get started on how to code your programs and lets you build up on it. I'd definitely recommend for a beginner.

MK

2017年8月6日

very good course to have basic understanding of C programming software , Arduino software which is explained in a very simple language where i was finding difficult before attending this course

篩選依據:

1476 - Arduino 平台与 C 语言程序设计 的 1500 個評論(共 1,512 個)

創建者 Debajyoti D

2020年7月20日

good

創建者 Pavithra G

2020年4月23日

Good

創建者 ANIL K A

2020年4月21日

Good

創建者 Cristóbal H J

2018年6月19日

First part of the course was good, but I think it lacked of projects and really doing projects using the Arduino. Besides, the last week is only about debugging (with a lot of detail) and I don't think it makes much sense to go to a lot of detail on debugging when we haven't learnt yet how to do sketches complex enough so advanced debugging is necessary.The course felt too easy at times, and at others to complex (using very specific terminology , specially in the last week). That being said, I believe the lecturer was clear and engaging when presenting the material.

創建者 Satyajit M

2021年7月24日

There are 6 courses in this specialization . The first two are almost completely theoretical with little to no practical knowledge. Most of the theory is boring and unnecessary. After completing these two courses(one audited and one sponsored by my school) you will have to pay a huge amount for the remaining courses and since this course did not teach me much I chose to not continue pay to finish the specialization.

創建者 John H

2017年7月18日

For an entry level course the C plus programming expectations jump considerably. While the quizzes and video lectures are helpful for understading both hardware and software, the final project doesn't seem to build on the I believed having basic familiarity with Arduino would help, but I was unable to complete the final project.

創建者 Cindy L

2020年2月26日

The teacher basically assumes you already know quite a bit, because he goes over the basics, but doesn't cover them in any detail. So if you're completely new to Arduinos, this course will not actually help

創建者 Paul I

2015年11月6日

This course barely touches C programming. While explanatory about the Arduino functions and structure, It should have been spread into more weeks so that it could cover more.

創建者 Ivan A

2016年2月19日

Not a bad introduction, but if you already know a bit about programming you can get the same basics and learn more quickly with a book.

創建者 Pablo L O

2019年7月23日

It is good starting course but it needs to move out from the beggining bits with something more useful and less theoretical

創建者 S.NIVETHA S - M

2020年7月2日

Not much practical oriented. Theory teaching is very vague and not able to understand much.

創建者 Claudius M

2017年9月15日

No forum, no support, and in the end I don't feel prepared for the assignments.

創建者 Mateus C

2016年1月5日

Too simple and lack of practice exercises!

創建者 Cole H G

2019年8月30日

Little hands on Arduino. Very theoretical

創建者 Veronica P d S M

2020年7月3日

Muito bom pena que não tem no meu idioma

創建者 Harsh T

2020年7月9日

not enough detail

創建者 Flávio H P d O

2017年3月9日

So superficial

創建者 ANKIT K

2022年5月9日

not so good

創建者 Rushant T

2021年4月3日

Good

創建者 Ashish s

2020年6月7日

Good

創建者 Sherif E M

2020年8月27日

In my honest opinion, 90% of this course content was totally irrelevant. The instructor focuses heavily on explaining stuff rather than how to do stuff. Furthermore, course title says "The arduino platform and C programming" but actually the course gives no sufficient attention to C nor arduino itself. Instead, it focused heavily on concepts that are not at all important to a programmer learning arduino and embedded systems in general such as UART, how data is sent serially and the steps towards creation of a hex file. In addition, no attention was given at all to actual arduino coding and not even a single relevant task was given.

創建者 Alexander I

2016年1月25日

The course is almost about nothing. It seems to me that the teacher didn't make enough preparations and make a lot of mistakes during the couse. After 8 weeks of Arduino-related courses I've got almost nothing new besides first 2 chapters of Arduino Starter Kit book.

創建者 Paul G

2019年11月11日

A truly terrible introduction to C. If you can't already program in C, know the difference between C and C++ or even know why you shouldn't call it C/C++ then you will struggle.

All the information is free and better presented in other places. Avoid.

創建者 Pablo B L

2016年1月31日

Deberían avisar que no se pueden subir para calificar los cuestionarios ni las tareas sin pagar. Esto en la semana 1, ya veremos si hay más sorpresas en las siguientes. Gracias.

創建者 Douglas O

2017年4月22日

All this peer grading nonsense is garbage. If we are gonna pay 63$ a month of something we can at least get the proper grading system included.