Chevron Left
返回到 Arduino 平台与 C 语言程序设计

學生對 加州大学尔湾分校 提供的 Arduino 平台与 C 语言程序设计 的評價和反饋

4.6
3,487 個評分
757 個審閱

課程概述

The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums. Upon completing this course, you will be able to: 1. Outline the composition of the Arduino development board 2. Describe what it means to program the board's firmware 3. Read board schematics 4. Install Arduino IDE 5. Describe what "shields" are and how they are used 6. Specify the role of libraries in the use of shields 7. Compile and run a program 8. Name C Variables and Types 9. Name common C operators 10. Use conditionals and loops 11. Explain functions, their definition and invocation 12. Explain the implications of global variables 13. Undertake the Arduino build process 14. Describe the role of the tools behind the IDE 15. Describe how to invoke functions in classes 16. Explain the structure of an Arduino sketch 17. Access the pins of the Arduino 18. Differentiate between digital and analog pin 19. Debug embedded software 20. Explain the importance of controllability and observability in the debugging process 21. Describe common debugging architectures for embedded systems 22. Explain how the UART Serial communication protocol works 23. Describe how the Arduino Serial library performs serial communication...

熱門審閱

MR

Aug 09, 2016

A very good course to teach you the basics of Arduino platform and IDE. It'll help you get started on how to code your programs and lets you build up on it. I'd definitely recommend for a beginner.

MK

Aug 07, 2017

very good course to have basic understanding of C programming software , Arduino software which is explained in a very simple language where i was finding difficult before attending this course

篩選依據:

101 - Arduino 平台与 C 语言程序设计 的 125 個評論(共 739 個)

創建者 Alejandro P S

Jul 29, 2016

Very educational and very good teacher!

創建者 Lin G S

Jun 14, 2018

Great Introduction to IOT, professor Ian Harris explains concepts concisely and humorously.Coding assignments get you started on the Arduino Platform quickly.

創建者 Maria E A

Oct 01, 2017

Excellent teacher!

創建者 Alireza A

Nov 18, 2015

Great introduction to the programming side of Arduino!

創建者 Ramanathakannappan

Oct 25, 2015

Clean and precise course for starters to IOT domain

創建者 Abhishek S

Oct 26, 2015

good one really in depth tutorials, must watch.

創建者 Ehab M A

Sep 23, 2016

Nice introduction about arduino and its components

創建者 Duvert A A V

Jul 13, 2017

The teacher and topics are the best!!

創建者 David F

May 05, 2016

Great course, great delivery style from the Lecturer. Moves along at a good, but not excessive pace.

創建者 Ricardo A d C S

Oct 02, 2017

Nice course. The platform and programming is explained in a simple way. If you are already a C or C++ programmer, only the topics dealing with the Arduino platform will be important.

創建者 craig c

Sep 18, 2016

GOOD place to start THe arduino intro is good but little short on c but its only 4 weeks not enough for me to grasp right off the bat anyway so i back off to next session then catch up more C then finish its only a couple short c videos then your asked to write programs with little or no knowledge basicly 3- 7 min lectures on the language EASY TO BE KINDA LOST AT FIRST IM 60 yrs old not twenty !!! From what im reading online LIBRARIES ARE TOTALLY LIMITED ON ARDUINOS IDE nd ITS NOT REALLY C its ARDUINO C because a lot of the workings of the arduino ide are easier for new people alot of the inner workings are hidden tough to learn the inner workings unlike a full featured IDE GOOD Platform to start on AFTER BASICS HERE with tidbits Id rather go later to C++ and spend the time there then get on better platform ARM PIC boards with real ides and REAL C + something you can use in the real world for bigger programs and I can see staying here at arduino too long and not going on to other platforms could cause bad programing habits to start with writing limited code just seems more productive after you get your electronics down coding and some hardwhare experience to go right to the real deal Pic arm or any of the other boards with a MUCH steeper learning curve GREAT to Figure out and learn electronics get some hardwhare experience here of course on ARDUINO and from what im seeing from some pros Even if there on more advanced platforms that run bigger faster programs dont have the bootloader many pros use arduino for a first layout to test circuits here first GOOD COURSE gets you DIGGING AND THINKING This is where to start you certainly cant start on advanced platforms right off its really almost impossible without a lot more skill to obtain first

創建者 Parekh A M

May 21, 2016

Really useful

創建者 Dattaprasad V M

Jan 26, 2016

This is fantastic course.

創建者 Jose W O

Apr 10, 2017

Very good material and structure overall, overall meets my expectations!

創建者 Fedor O

Nov 15, 2015

Great course to get started with Arduino! Short lectures explaining the basic concepts and how to start programming the Arduino. It's quite short so I'd recommend to freely browse additional material and videos while you're taking the course.

Have fun with Arduino projects!

創建者 Luis

Jan 24, 2018

Course is very basic but great to use to refresh on a few things or to get a brief explanation of the Arduino and C.

創建者 Adriano R M

Nov 25, 2015

top

創建者 Sagheb K A

Oct 20, 2017

This course was really excellent.

創建者 ravikanthdadi

May 05, 2016

Always best

創建者 Max H

Jun 28, 2016

Great class and great professor!

創建者 Javier M E

May 16, 2016

Clear and well explained.

創建者 SATYENDRA K S

Sep 09, 2016

I like this Course so much,In this course nothing is prerequisite,Instructor is very good he expains every things very nicely.I thinks all the student can do this course.

創建者 Chaitanya S

Dec 30, 2016

a really good cource for those who don't have any knowledge in programming good support to c language and basic aurdino stuff, hope everyone feel the same

創建者 Rajesh K

Jun 09, 2017

This course helped me understanding the schematics of Arduino, add-ons (Shield) and interactive with other devices by means of c-programming language. Don't have to be an expert programmer but a little knowledge of programming will help.

創建者 amir f

Nov 02, 2016

it was great , and its teacher was greater :)